How to Fix Epson Printer Error Code 0x97?

Epson is one of the best printers in the whole world. Its printer is very great and very chip But sometimes some error is coming and All these are one of the Epson error is 0x97. If your Epson printer is displaying such error code, look for permanent solutions to Fix Epson error code 0x97.

When a hardware failure happens without warning, that time you can also try the following:

Unplug and Plug-in

1. When this error message appears on your screen.
2. Turn on off printer power and unplug.
3. Unplug all connected cables of the printer.
4. Unplug USB drivers for the printer.
5. Remove all printer cartridges.
6. Still turned off, and press down power to release all remaining current in the printer.
7. Plug in all cables and USB. Reinstall printer cartridges. Turn power on.
8. See if the error message remains.
9. If the error persists, continue to the next method.

Unplug and plug in (2)

1. Turn off the Epson printer and unplug.
2. Disconnect printer all cables and USB.
3. Wait for 5 minutes and until printer cools down.
4. Press and hold the power of the printer button for 60 seconds. DO NOT RELEASE.
5. After 60 seconds (DO NOT RELEASE), plug-in power cord and hold for another 60 seconds.
6.    Release the power button of the Epson printer. Check if error message still appears.

Have you constantly whining about the Epson printer error code 0x97? If yes, then get the Epson Printer Support Number to eradicate the problem from its roots. No matter how complex the error is and how long it takes to make it disappear, our support team will back you always.